ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

A broadcast on a Layer 2 switched network will be processed by all devices. (True or False)

A) True

B) False


Answer: A
A layer 2 switched network is a single broadcast domain and thus all devices will process all broadcasts.


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

What is VLAN?

A) A Broadcast Domain

B) A Collision Domain

C) A Logical Network (Subnet)

D) A Decision Domain

Select the 2 best answers.


Answer: A, C
As networks grow in size and complexity, many companies turn to Virtual Local Area Networks (VLANs) to provide some way to structure this growth logically. Basically, a VLAN is a collection of nodes that group together in a single broadcast domain. The basis for the group is something other than physical location. The section Switch Technologies describes broadcasts and how a router does not pass along broadcasts. A broadcast domain is a network or portion of a network that receives a broadcast packet from any node within that network. In a typical network, everything on the same side of the router is part of the same broadcast domain. A switch on which you have implemented VLANs now has multiple broadcast domains, which is similar to a router. But you still need a router to route from one VLAN to another. The switch alone cannot perform this routing.


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

Which of the following access lists permit all traffic?

A) access-list 100 permit any

B) access-list 1 permit any

C) access-list 100 permit ip any any

D) access-list 100 permit ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255

E) access-list 1 permit 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255

F) access-list 1 permit 0.0.0.0 255.255.255.255

Select the 4 best answers.


Answer: B, C, D, F
A source/source-wildcard setting of 0.0.0.0/255.255.255.255 can be specified as any.

Check the access list number - this determines if the access list is a standard or extended access list.


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

What static routes need to be configured on the router to enable connectivity between the PC's?













A) Router 1: ip route 172.16.1.2 255.255.255.0 10.1.1.2

B) Router 1: ip route 172.16.1.0 255.255.255.0 172.16.1.1

C) Router 2: ip route 192.168.10.0 255.255.255.0 10.1.1.1

D) Router 2: ip route 192.168.10.0 0.0.0.255 10.1.1.1

E) Router 2: ip route 192.168.10.0 255.255.255.0 192.168.10.1

F) Router 1: ip route 172.16.1.0 255.255.255.0 10.1.1.2


Select the two best answers.


Answer: C, F

The static routes needed are:

Router 1: ip route 172.16.1.0 255.255.255.0 10.1.1.2
Router 2: ip route 192.168.10.0 255.255.255.0 10.1.1.1

172.16.1.0 and 192.168.10.0 specify the static routes to the destination subnetworks
255.255.255.0 indicates the subnet mask
10.1.1.2 and 10.1.1.1 indicate the next hop ip address


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

To resolve the split horizon rule in a NBMA environment when running EIGRP, split horizon can be turned off. (True or False)


A) True

B) False


Answer: A


To your success,
David BombalCCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

What is the meaning of P in the diagram?














A) EIGRP computations are being performed for this destination


B) EIGRP route changes are being made


C) No EIGRP computations are being performed for this destination


D) EIGRP is updating the routing table


E) EIGRP is not updating the routing table


Select the best answer.


Answer: C


P - Passive - No EIGRP computations are being performed for this destination.


A - Active - EIGRP computations are being performed for this destination.




To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

What command identifies the username of "remote" and password of "cisco" of a remote router?

Answer:
username remote password cisco

username
To establish a unsername-based authentication system, use the username command in global configuration mode

username name password secret

Example:
username superuser password superpassword

Configure the usernames and passwords. To do so, issue the username username password password command, where the username is the hostname of the peer. Ensure that:


-Passwords are identical at both ends.


- The router name and password are exactly the same, because they are case-sensitive.


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

Out of which ports will the frame from PC1 be transmitted?


















A) E0


B) E1


C) E2


D) E3


E) E4


F) All Ports


Answer: F
The switch will forward broadcast and multicast frames out of all ports.


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

Which access-list will permit PC1 to telnet PC2 in the diagram? The access-list is bound to E0 inbound.











A) access-list 1 permit 172.16.1.1 0.0.0.0

B) access-list 1 permit ip 172.12.1.1 0.0.0.0

C) access-list 1 permit host 172.16.1.1

D) access-list 1 permit host 172.16.1.1 any

E) access-list 1 host 172.16.1.1 any

F) access-list 100 permit 172.16.1.1 0.0.0.0


Select the 2 best answers.


Answer: A, C


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

Which protocol is used to distribute and synchronize identifying information about VLANs that are configured throughout a switched network.

A) STP

B) TDP

C) VTP

D) TVP

E) VLAN

F) ISP

Answer: C
The Vlan Trunking Protocol (VTP) is used to distribute VLAN information.


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

What are example of classless routing protocols?

A) RIP v1

B) RIP v2

C) EIGRP

D) OSPF

E) IS-IS

F) IGRP

Select the best 4 answers

Answer: B, C, D, E
Examples of classful routing protocols are RIP v1 and IGRP. Examples of classless routing protocols are RIP v2, EIGRP, OSPF, & IS-IS


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

What bit is normally marked when you send traffic above the CIR of a Frame Relay virtual circuit?

A) DA

B) DB

C) DC

D) DE

E) ARP

F) CLP


Answer: D
Frames that are marked as "discard eligible" should be discarded before other frames in a congested network. This allows for a basic prioritization mechanism in Frame Relay networks.

The Discard eligibility (DE) can be set the network cloud when traffic exceeds the CIR of a circuit.

The DE can also be set by the DTE device, such as a router, to indicate that the marked frame is of lesser importace relative to other frames being transmitted.


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

What does Inverse ARP map?

A) Local DLCI to local IP address

B) Local DLCI to remote IP address

C) Remote DLCI to local IP address

D) Remote DLCI to remote IP address


Answer: B
Inverse Address Resolution Protocol. Method of building dynamic routines in a network. Allows an access server to discover the network address of a device associated with a virtual circuit.

To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

All Cisco switches have a MAC address table size of 8192 entries? (True or False)

A) True

B) False


Answer: B
The size of the MAC address table varies from switch to switch. The Catalyst 2950 series for example, can hold up to 8192 entries.


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

Which encapsulation uses a native VLAN?

A) ISL

B) 802.1q

C) Both ISL and 802.1q


Answer: B
802.1Q is the IEEE standard for tagging frames on a trunk and supports upto 4096 VLANs. In 802.1Q, the trunking device inserts a four-byte tag into the original frame and recomputes the Frame Check Sequence (FCS) before sending the frame over the trunk link. At the receiving end, the tag is removed and the frame is forwarded to the assigned VLAN. 802.1Q does not tag frames on the native VLAN. It tags all other frames transmitted and received on the trunk. While configuring 802.1 trunk, you must make sure that the same native VLAN is configured on both sides of the trunk. IEEE 802.1Q defines a single instance of spanning tree running on the native VLAN for all VLANs in the network which is called Mono Spanning Tree (MST). This lacks the flexibility and load balancing capability of PVST avialable with ISL. However, PVST+ offers the capability to retain multiple Spanning Tree topologies with 802.1Q trunking.

To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

Standard IP access lists filter traffic based on which of the following?



A) Source MAC Address

B) Destination IP Address

C) Source IP Address

D) Source Port Number

E) Destination Port Number

F) Destination MAC Address


Answer: C

To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day

CCNA & ICND2 Question:

What EGP is used on the Internet?

A) EGP

B) EIGRP

C) RIP

D) IGRP

E) BGP

F) OSPF


Answer: E

The two types of routing protocols are as follows:

1) Interior Gateway Protocols (IGPs): These routing protocols are used to exchange routing information within an autonomous system. Examples are: RIPv1, RIPv2, IGRP, EIGRP, and OSPF

2) Exterior Gateway Protocols (EGPs): These routing protocols are used to connect between autonomous systems. An autonomous system is a collection of networks under a common administration and sharing a common routing strategy. An example is Border Gateway Protocol (BGP)


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day - 8 February

CCENT & CCNA Question:


What command will display the output in the Diagram?



















A) show startup-config


B) show running-config


C) show version


D) show ip route


E) show interface


F) write


Answer: B

Router #show running-config
Building configuration...



To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day - 7 February

CCENT & CCNA Question:

Match the blocks on the left to the correct ones on the right

















Answer:

A Curremt Configuration === show running-config

B Saved Configuration === show startup-config

C Configuration Register === show version

D IOS file === show flash

E Time information === show clock

F Routing protocols running === show ip protocols


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day - 6 February

CCENT & CCNA Question:


Match the blocks on the left to the correct ones on the right
















Answer:
A Local access rate === Port speed

B PVC === Permanent connection

C SVC === Temporary connection

D DLCI === Local significance

E CIR === Maximum average data rate

F Inverse ARP === Dynamically associate Layer 3 address to DLCI


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day - 5 February 2008

CCENT & CCNA Question:


Ethernet switches and bridges increase the available bandwidth by reducing the number of devices contending for the segment bandwidth. (True or False)


A) True
B) False

Select the best answer


Answer: A


Ethernet switches and bridges increase the available bandwidth by reducing the number of devices contending for the segment bandwidth.


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day - 4 February 2008

CCENT & CCNA Question:

Which hosts are on the same network as PC1?

A) 192.168.10.16/27
B) 192.168.10.20/27
C) 192.168.10.23/27
D) 192.168.10.21/27
E) 192.168.10.33/27
F) 192.168.10.40/27

Select the 4 best answers


Answer: A, B, C, D

network: 192.168.10.0000 0000 = 0
broadcast: 192.168.10.0001 1111 = 31


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/

ConfigureTerminal.com Free CCENT & CCNA Question of the day - 3 February 2008

CCENT & CCNA Question:

At what layer of the OSI model does a router operate?

A) Session
B) Data Link
C) Network
D) Transport
E) Application
F) Physical


Answer: C


A Router operates at layer 3 of the OSI model or the network layer.


To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/